- 180 Days
- 2-3 workdays
- KUKA Krc1 69-357-225 Controller
- Part No.
- KUKA Krc1 69-357-225 Teach Pendant
- Kuka SmartPAD Parts
- Touchscreen, Keypad, Case, Display
- 2019-07-02 11:06
VICPAS helped us find a right part for our HMI repair. Nice work!
Supply KUKA KRC1 69-357-225 Teach Pendant Parts, Membrane Keypad, LCD Display and Protective Case Shell Replacement
Switching on the kuka krc1 control cabinet.
After you have correctly installed and connected your robot system, you can start it up forthe first time.
Turn on themain switch of your control cabinet. The computer integrated intothe control cabinet begins to load the programs and data required for operation from the hard disk. You can follow the run--up phase of the controller on the KCP1 display. The run--up phase is concluded after approximately 3 minutes and the main menu of the KR C1 A controller is displayed.
As the EMERGENCY STOP button is pressed at this stage (and the EMERGENCY STOPcircuits of the periphery may not have been wired up yet), the robot cannot yet be moved.Appropriate messages are displayed on the KCP to inform you of this.
The video below describes the product details of the KUKA Krc1 69-357-225 Controller Keypad LCD Display and Case(shell).
Related Kuka SmartPAD Models :
|KUKA SmartPAD||Description||Inventory status|
|KUKA KRC1 KCP1 VKRC1||Kuka SmartPAD Cotroller Parts||In Stock|
|KUKA KRC1 69-000-398||Krc1 Kuka Touchscreen, Keypad, LCD, Case||Available Now|
|KUKA KRC1 64-000-348||Kuka Krc1 Teach Pendant Parts||In Stock|
|KUKA KRC1 69-357-225||Kuka Krc1 Controller Accessories||In Stock|
|KUKA KRC2 KCP2 VKRC2||Robots Kuka Krc2 Controller Accessories||Available Now|
|KUKA KRC4 KCP4 VKRC4||Kuka Krc4 Compact Cotroller Parts||In Stock|
|KUKA KR C5 00-291-556 SmartPAD-2||Kuka SmartPAD-2 Cotroller Parts||In Stock|
|LM8V302||LCD Display for KUKA Krc1 Krc2 teach pendant repair||In Stock|
|KUKA Teach Pendant||Description||Inventory status|
KUKA SmartPAD Manuals PDF Download:
Question: How to operate a KUKA KRC1 69-357-225 controller?
Answer: 1) Generate your KUKA controller programs on the PC and transfer them to the robot. You can set up file sharing in Windows 95 and connect the robot up to your network. One word here -KUKA KRC1 69-357-225 does not allow you to copy programs directly into its active /programs folder.
You must copy it somewhere else on the C:, make sure the teach pendant is in expert mode, and copy/paste the programs into the right spot on the teach pendant, because KRC1 needs to feel special about it and compile the program as it pastes in. If you are doing some milling type work then make sure each of these files does not exceed 100k or so in size.
2) Use a PLC + DeviceNet or some other supported card in your KRC1 to transfer your position data/command via registers. KRC1 likes registers.
3) Just buy a KRC4 robot with the right control comm package and save your sanity.
Question: What is the KUKA Krc1 69-357-225 controller price of membrane keypad with case(shell), LCD Display?
Answer: Submit a fast quote, send VICPAS an email for best price.
More Details about KUKA SmartPAD Controller Parts